Home > Used Robots > Used OTC Robots > OTC Almega T Series Robots

OTC Almega T Series Robots

Almega T Series 300x225 OTC Almega T Series RobotsController

Applications:

Turntable Welding

 WELDING OPTIONS 
Seam Finding 
Seam Tracking
Wide Variety of Power Sources

The DAIHEN Almega T Series Arc Cells are shipped pre-assembled to reduce installation time. All are designed with forklift pockets to allow for easy placement in your manufacturing area. Installation is quick and simple, and usually accomplished in just a few hours.

SAFETY
The overall safety environment of the T Series incorporates tamper resistance, safety interlocks, and a fully enclosed robot-operating area with protective arc shielding. Other features include light curtains to prevent the turntable from indexing while the operator is in the “working area” of the system.

The DAIHEN T Series of turntable welding systems are designed to efficiently weld small workpieces while requiring a minimal amount of floor space 7’-2” W x 12’-3” L (2175 mm x 3,745.14 mm).

“T” SERIES FAMILY MEMBERS:

T48A – Features the pneumatic TA-251 48” turntable enabling a quick cycle time and accurate parts positioning.
»    TA-251 / 48” Diameter Table
»   Pneumatically Driven 
»   <275 lbs. (125 kg) Per Side Payload
»   180_ Indexing/ 2 Position
»   4 Second Average Indexing Time

T60A – Features the pneumatic TA-502 60” turntable which delivers a quick cycle time and accurate part positioning
»   TA-502 / 60” Diameter Table
»   Pneumatically Driven
»   550 lbs. (250 kg) Per Side Payload
»   180_ Indexing / 2 Position
»   PLC Driven 4 Second Average Indexing Time

T60S / T72S – The T60S features the servo driven T60SVM-600 60” diameter table and the T72S features the servo driven T72SVM table with a 72” diameter accommodating larger parts while continuing to provide high repeatability and quick cycle times. As an option, additional positions can be programmed at the factory.
»   T60SVM-600 / 60” Diameter Table | T72SVM-500 / 72” Diameter Table
»   Servo Driven / 2 Position
»   (Std.) 660 lbs. (300 kg) Per Side Payload
»   180_ Indexing / 2 Position
»   4 Second Average Indexing Time

Standard Features
• Light Curtains Interlocked with Robot Controller
• Protective Arc Curtain
• Electrically Interlocked Doors
• Center Hole for Tooling Utilities
• Door Placement on Side of Cells
• Single Point Station controls for all cell functions

System Options 
• Arc Monitoring
• Additional Robot to decrease cycle time
• Touch screen Operation box with PLC

AX-V4 or AX-V6 Welding Package 
• (Standard) Air-Cooled
• Torch Shock Sensor
• Arm-Mounted Wire Feeder with Built-in Encoder
• Inverter Controlled Digital Welding Power Sources

Standard Software Options 
• Synchromotion
• PC Program Storage Software
• Program Editing Software
• Offline Programming Software