OTC announces the new welding power supply DP400R
The next evolution in welding – A more powerful pulse welding machine
Improved stability and quality for stainless and mild steel welding
KC Robotics is an authorized OTC-Daihen dealer. Contact us now for a first viewing of the new OTC welding power supply.
The All digital, wave-form generation allows you to design special wave forms for pulse welding steel and aluminum. The Laser seam-tracking option makes more accurate welds than “through the arc” seam tracking.
Benefits of the OTC Welding Power Supply DP400R
- Lower spatter with high speed welding: With an optimized wave pulse method, high quality welds are achieved even with lower voltages during high speed welding.
- Reduced porosity, even with galvanized welding.
- Wider range of stability: This power supply performs stable high quality welding even when the gas mixture ratio is changed.
- Advanced Arc Start Control: “CP-start” provides a smooth arc start and is able to prevent interruption of the weld due to arc start failures.
- Beautiful welding bead appearance: Reduced spatter generation for clean beautiful looking welds.
- TIG like bead appearance with WAVE PULSE II: By controlling the wire feed speed a TIG like bead appearance can be achieved.
- Better gap welding control with WAVE PULSE II: Wave Pulse welding provides better heat control and improves the tolerance to gaps.
- Simple to install on OTC Almega AII robots: The connection between the Almega AII and the D-series power supply is simple when using a CAN interface board (optional).
- Almega AII welding benefits: OTC’s RS control (optional) achieves stable arc starts and reduces spatter with a 4-roll wire feeder. This also helps reduce poor welding due to arc start problems. Also, the OTC Almega AII welding robot series can determine the welding conditions through the teach pendant automatically using given welding conditions (thickness, joint type, weld length, and welding speed).
- Standard warranty 3 years on parts and labor
- The DP400R has an 80% duty cycle at 400 amps and a 100% duty cycle at 350 amps.
- The DP400R can be retrofitted to almost any robot including FANUC, Motoman, and ABB.
OTC Daihen Corporation introduced the new DP400R welding power supply on October 5, 2009 to OTC Suppliers. It will be available later this year from KC Robotics, Inc. Call or email now to be the first to see a demonstration this new generation of welding power supply.
Related posts:
